This is a minor revision from June 2004. An errant reference for the −5V rail was removed. Other minor changes were introduced. [25] ATX12V v2.1 [ edit ] Thin Form Factor is another small power supply design with standard ATX specification connectors. Its dimensions are generally (W × H × D): 85× 64× 175mm (3.34× 2.52× 6.89in). [40] [41] WTX [ edit ] Increased minimal efficiency for full load from 68% to 70% and defined minimal required PSU efficiencies for light (50% minimal efficiency) and typical (60% minimal efficiency) loads.

Cooler Master UCP Product Sheet". Cooler Master. 2008. Archived from the original (PDF) on 2014-07-28 . Retrieved 2014-10-11. Systems that use an ISA bus should have a PSU that provides the −5V rail, which became optional in ATX12V 1.2 and was subsequently phased out by manufacturers. Thermaltake’s Core V21 is one of the older cases on our list, which shows in its frankly outdated aesthetics. But behind that dull exterior is a great case whose flexibility and options keep it relevant despite its age. Modern Form Factors: EPS, TFX, CFX, LFX, And Flex ATX - Power Supply 101: A Reference Of Specifications The ATX12V 2.4 specifications were published in August 2021. It is specified in Revision 1.31 of the 'Design Guide for Desktop Platform Form Factors', which names this as ATX12V version 2.4. [29] ATX12V v2.51 [ edit ]

MORE POSTS BY Ruth Rowley

PC Power Supply Requirements and Troubleshooting Problems". RepRap project. September 19, 2018. Archived from the original on September 19, 2018. Original AT cases (flat case style) have an integrated power switch that protruded from the power supply and Power Supply Design Guide for Desktop Platform Form Factors Revision 002" (PDF). Intel. June 2018. Archived (PDF) from the original on March 13, 2020 . Retrieved September 15, 2020.

a b "AT / ATX12V Power Supply Design Guide Version 1.1" (PDF). Intel Corporation. August 2000. p.28. Archived (PDF) from the original on 2010-12-07 . Retrieved 2011-03-11. Most power is now provided on 12V rails. The standard specifies that two independent 12V rails (12V 2 for the four-pin connector and 12V 1 for everything else) with independent overcurrent protection are needed to meet the power requirements safely (some very high power PSUs have more than two rails; recommendations for such large PSUs are not given by the standard). ASUS is known for many things, but in general, the company hasn’t been known for making PC cases, or at least they weren’t. The ASUS Prime AP201 is great proof that the company should keep it up, though, as it offers a great combination of style, a spacious interior, and solid cooling. A control signal that is low when other outputs have not yet reached, or are about to leave, correct voltages. A supplemental 6-pin AUX connector providing additional 3.3V and 5V supplies to the motherboard, if needed. This was used to power the CPU in motherboards with CPU voltage regulator modules which required 3.3volt and/or 5volt rails and could not get enough power through the regular 20-pin header.The ATX motherboard connector was extended to 24 pins. The extra four pins provide one additional 3.3V, 5V and 12V circuit. This is an ATX12V power supply derivative made by AMD to power its Athlon MP (dual processor) platform. It was used only on high-end Athlon MP motherboards. It has a special 8-pin supplemental connector for motherboard, so an AMD GES PSU is required for such motherboards (those motherboards will not work with ATX(12V) PSUs).

ATX12V Power Supply Design Guide Version 2.01" (PDF). Intel Corporation. June 2004. p.44. Archived from the original (PDF) on 2009-11-22 . Retrieved 2013-03-24. The power distribution specification defined that most of the PSU's power should be provided on 5V and 3.3V rails, because most of the electronic components (CPU, RAM, chipset, PCI, AGP and ISA cards) used 5V or 3.3V for power supply. The 12V rail was only used by computer fans and motors of peripheral devices (HDD, FDD, CD-ROM, etc.) The use of a cutting-edge PFC circuit in combination with a fully digital platform seems to be the key for record-setting performance. Besides its super efficiency, the AX1600i also offers great load regulation, amazing transient response, a long hold-up time, and unparalleled ripple suppression. Moreover, the great benchmark results are accompanied by quiet operation, enabled by a relaxed fan profile and a high-quality FDB fan. Using the Corsair Link software, you're able to choose between three fan modes: performance, balanced, and quiet. You may be surprised to know that the ATMA G1M still only takes an SFX or SFX-L PSU, despite its 31.1-liter volume. However, there’s a good reason for that: going with a smaller power supply allows for excellent component and cooling compatibility. High-performance video card power demands dramatically increased during the 2000s and some high-end graphics cards have power demands that exceed AGP or PCIe slot capabilities. For these cards, supplementary power was delivered through a standard 4-pin peripheral or floppy power connector. Midrange and high-end PCIe graphics cards manufactured after 2004 typically use a standard 6 or 8-pin PCIe power connector directly from the PSU.

Micro ATX Cases

Older systems (before Pentium4 and AthlonXP platforms) were designed to draw most power from 5V and 3.3V rails. Let’s get it out of the way: the InWin CJ712 isn’t the best Micro-ATX case if you want to build a high-performance gaming PC. But if you’re building a low-power mATX computer, it might be the perfect case for you.

Mark, Soper; Prowse, David; Mueller, Scott (September 2012). Authorized Cert Guide: CompTIA A+. Pearson Education. ISBN 978-0-7897-4850-8.ATX12V 1.x PSUs have power distribution designed for P4/XP PCs, but they are also greatly suitable for older PCs, since they give plenty of power (relative to old PCs' needs) both on 12V and on 5V/3.3V. It is not recommended to use ATX12V 1.x PSUs on ATX12V 2.x motherboards because those systems require much more power on 12V than ATX12V 1.x PSUs provide. This revision became effective in February 2008. It added a maximum allowed ripple/noise specification of 400 millivolts to the PWR_ON and PWR_OK signals, requires that the DC power must hold for more than 1 millisecond after the PWR_OK signal drops, clarified country-specific input line harmonic content and electromagnetic compatibility requirements, added a section about Climate Savers, updated recommended power supply configuration charts, and updated the cross-regulation graphs. NOTE: -Branded PC usually come with a tailor made PSU which is expensive and difficult to replace. There are however some other similar high quality PSUs that can replace them. -A replacement PSU does not necessarily need to have the same power output. In fact, the more powerful, the better. This will allow you to run more devices on your computer. -Most PSU come with enough standard connectors but additional connectors are available. Sometimes all you want is a standard tower case, just smaller. If that’s what you’re after, SilverStone’s PS15 PRO fits the bill. And unlike some of its competition, you get good airflow to boot. Foxconn F1 Motherboard Prototype". Hardwaresecrets.com. Archived from the original on 24 October 2014 . Retrieved 18 November 2014.