Autoglym Polar Blaster Snow Foam Lance, Car Wash Foam Gun For Pressure Washer Application

Most snow foamers will use it in conjunction with a snow foam lance attachment to their pressure washer, but you can also use them with a manual spray bottle or a garden hose attachment. There are plenty of good pressure washers on the market. But if you’re on a tight budget, you can try a pump-operated pressurised spray bottle instead. Just bear in mind that you might not get the same spectacular results. Spray Polar Seal onto the clean, wet vehicle, ensuring all exterior surfaces are covered, although avoid direct application to the windscreen. Polar Blast has been primarily formulated as a new pre-wash product. By using it in advance of your regular Autoglym shampoo you will loosen heavy soiling and contaminants and begin to dissolve traffic film. This will significantly reduce the risk of contamination scratching your paintwork when you agitate the shampoo foam with a sponge or wash mitt.The Polar Blaster is a foam cannon that can be attached to domestic pressure washes to enhance the foam levels and user experience of the three products in the Autoglym Polar range. It fixes to the lance and comes with a bottle reservoir that contains the dilute product, negating the need to place a fill pipe in the product bottle. Spray Polar Wash onto the vehicle, starting at the bottom, ensuring all exterior surfaces are covered, including glass and wheels.

Only a small amount of Polar Seal is required. Pour no more than 40ml (four capfuls) into your foam bottle and then add at least 200ml of water. This should be all the finished solution required to cover your vehicle. There is no benefit in using any more than 40ml as over application can compromise the finish. product/helpAdviseTab.hbs -->