Pioneer MVH-S520DAB 1-DIN receiver with DAB/DAB+, Bluetooth, multi colour illumination, USB, Spotify, Pioneer Smart Sync App and compatible with Apple and Android devices.

Product Information

When speaker output is used by 4 channels, use speakers over 50 W (maximum input power) and between 4 Ω to 8 Ω (impedance value). Do not use 1 Ω to 3 Ω speakers for this unit. Do not attempt to operate the application while driving. Make sure to pull off the road and park your vehicle in a safe location before attempting to use the controls on the application. Depending on where you live, the time it may take for your exchanged product to reach you, may vary. There is also control for that subwoofer RCA output. Alternatively, set the three sets of RCAs up as a fully digitally crossed-over network of outputs. No amplifier to feed? You can still do the subwoofer drive thing by internal speaker power. I recall Pioneer doing this first. Others have copied it.

It is extremely dangerous to allow the microphone lead to become wound around the steering column or shift lever. Be sure to install the microphone in such a way that it will not obstruct driving. It is recommended to use the clamps (sold separately) to arrange the lead. When rear speaker output is used by 2 Ω of subwoofer, use speakers over 70 W (maximum input power). When this unit is on, control signals are sent through the blue/white cable. Connect this cable to the system remote control of an external power amp or the vehicle's auto-antenna relay control terminal (max. 300 mA 12 V DC). If the vehicle is equipped with a glass antenna, connect it to the antenna booster power supply terminal. For smartphone users, simply connect your iPhone or Android smartphone wirelessly (via Bluetooth) and safely enjoy Spotify (both for Free and Premium Spotify users) or the Pioneer Smart Sync app, which will take your smartphone to a whole new level. MVH-S520DAB 1-DIN receiver with DAB/DAB+, Bluetooth, multi colour illumination, USB, Spotify, Pioneer Smart Sync App and compatible with Apple and Android devices. Bluetooth, DAB and smartphone connectivity combined.Switch between two operation modes: the 2-way network mode (NETWORK) and the standard mode (STANDARD) according to the connections you have established. To ensure proper use, please read through this guide before using this product. It is especially important that you read and observe WARNINGS and CAUTIONS in this guide. Please keep the guide in a safe and accessible place for future reference.

Regardless of whether the [AUTO APP CONN] setting is set to [ON] or [OFF], you can also perform the following to start Pioneer Smart Sync. Change the initial menu of this unit. Refer to [REAR-SP]. The subwoofer output of this unit is monaural. This all-new, top of the line device sets new standards in terms of audio performance and connectivity. Nevertheless, it’s very easy to use and control.The features for serious sound control make this a contender for bossing a truly hench system. The front and rear speaker outputs can be crossed-over so the deep bass is kept from speakers that will waste energy trying to reproduce them. There is a choice of frequencies from 50Hz and up. That’s great for removing deep stuff from say, rear six-inchers, to make them hit harder. You can run four inchers much louder if you cross them high-pass at 200Hz. Depending on the kind of vehicle, the function of and may be different. In this case, be sure to connect to and to . Bluetooth connectivity allows for safe and convenient hands-free calling, as well as wireless music streaming from your smartphone. Thanks to Pioneer’s unique Advanced Sound Retriever technology, the sound quality will be as close to the original recording as possible. You can even connect two Bluetooth phones simultaneously. Make no mistake, the MVH-S520BT is a true high-end car audio system. It reads FLAC files, is equipped with a 13-band Graphic EQ, 3-Way Network Mode, 3 RCA pre-outs, an on-board MOSFET 50 W x 4 amplifier and Pioneer's Karaoke feature, making the MVH-S520BT the perfect partner on any journey. Make no mistake, the MVH-S520DAB is a true high-end car audio system. It reads FLAC files and is equipped with a 13-band Graphic EQ and an on-board MOSFET 50 W x 4 amplifier. Thanks to the Time Alignment feature, you'll enjoy the very best sound quality, whatever the vehicle the unit is installed in. Utilising the 3 RCA Pre-outs you can connect to other amplifiers, speakers or subwoofers, for even more versatility. Features: